Product List
Geared Head Extra Heavy Duty Lathe Machine
Geared Head Extra Heavy Duty Lathe Machine
Geared Head Heavy Duty Lathe Machine
Geared Head Heavy Duty Lathe Machine
Geared Head Medium Duty Lathe Machine
Geared Head Medium Duty Lathe Machine
Geared Head Light Duty Lathe Machine
Cone Pulley Light Duty Lathe Machine
Cone Pulley Light Duty Lathe Machine VLM Model
Cone Pulley Medium Duty Lathe Machine
Cone Pulley Heavy Duty Lathe Machine
Cone Pulley Extra Heavy Duty Lathe Machine
Cone Pulley Extra Heavy Duty Lathe Machine
Cone Pulley Extra Heavy Duty Lathe Machine
Universal Radial Drilling Machine VR-38
Special Purpose Machine
Special Purpose Machine
:: Products - Geared Head Light Duty Lathe Machine
Model No : 165
TECHNICAL DATA AND SPECIFICATIONS FOR STANDARD MODEL VGM - 165
 
Centre Height over flat bed ways :
 165 m.m.
Swing Over Bed :
 325 m.m.
Swing Over Cross Slide :
 175 m.m.
Swing in Gap :
 500 m.m.
Width of Bed 225 m.m.
 
MODEL ADMIT BETWEEN
CENTRES		 LENGTH OF BED Floor Space
Occupied (m.m.)		 Aprox.Weight in Kgs. Aprox. Case
Dimensions (m.m.)
Nett. Gross
VGL-2 660 m.m. 1370 m.m. 1500x850 550 725 1700x900x1350
VGL-3 890 m.m. 1600 m.m. 1750x850 600 790 1950x900x1350
VGL-4 1135 m.m. 1820 m.m. 2200x850 650 850 2400x900x1350
 
MAIN SPINDLE :
 
Type of Spindle Nose

Spindle bore

Spindle Morse Taper

Spindle Adapter Morse Taper

Spindle Speeds
Nos. / RPM Range

Spindle Mounting on 		: Threaded

: 38 m.m.

: MT - 5

: MT - 3

: 8     54, 90, 140, 224,      RPM
         315, 500, 775, 1200. RPM

: Taper Roller Bearings
STANDARD ACCESSORIES :
Flame Hardened bed ways, Chuck back plate 1 no, centre adapter, Dead centres 2 nos., Tool Post Spanner, Motor pulley, Thread dial indicator, Change gear set - 1 (For metric and inch both) and Norton gearbox.
 
TAIL STOCK SPINDLE :
 
Spindle Diameter : 38.1 m.m.
OPTIONAL ACCESSORIES :
Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, motorised coolant pump with tank and fittings, Rear tool post with extended cross slide, Chuck back plates (Extra), and Electricals (Motor, Panel board, Wirings, Push button Switches, V-belts and fittings), Electrical Switch shaft and splash guard.
Spindle Travel : 120 m.m.
Spindle Morse Taper : MT - 3
LEADING SCREW : Diameter / Threads : 25.4 m.m. / 4 TPI
Nos. of Threads / Range Metric : 17 / 0.5 m.m. To 15 m.m. Pitch
(For Fully norton Gearbox) Inch : 40 / 2 to 60 TPI
 
ELECTRICALS :
Electric Motor of 1 H.P. / 0.75 k.w., 3 Phase, 50 Hz, 440 V., 1440 RPM with Reverse - Forward switch, V-Belt, Electrical Wirings and fittings.
 
NOTE :
(1) As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.

(2) The descriptions of standard accessories confirms to it's list and not the photograph of the machine shown in the catalogue.
 
 
  Home | Company | Quality | Products | Contacts  
Copyright © 2007 Vinit Engineering Works. All rights reserved.