:: Balaji Lathe :: VINIT ENGINEERING WORKS

Product List

	Geaered Head Heavy Duty Late Machine
	Geaered Head Medium Duty Late Machine
	Universal Radial Drilling Machine VR-38
	Cone Pulley Heavy Duty Lathe Machine
	Cone Pulley Medium Duty Lathe Machine
	Cone Pulley Light Duty Lathe Machine
	Cone Pulley Heavy Duty Lathe Machine VLM Model
	Cone Pulley Extra Heavy Duty Lathe Machine
	Special Purpose Machine
	Special Purpose Machine

:: Products - Cone Pulley Light Duty Lathe Machine

TECHNICAL DATA AND SPECIFICATIONS FOR STANDARD MODEL VL-2, VL-3, VL-4.

	STD C.H.
Centre Height over flat bed ways :	165 m.m.
Swing Over Bed :	325 m.m.
Swing Over Cross Slide :	175 m.m.
Swing In Gap :	510 m.m.
Length of Gap in front of Face Plate :	115 m.m.
Width of Bed :	225 m.m.

MODEL	ADMIT BETWEEN CENTRES	LENGTH OF BED	Floor Space Occupied (m.m.)	Aprox. Weight in kgs.		Aprox. Case Dimensions (m.m.)
MODEL	ADMIT BETWEEN CENTRES	LENGTH OF BED	Floor Space Occupied (m.m.)	Nett.	Gross	Aprox. Case Dimensions (m.m.)
VL-2	660 m.m.	1370 m.m.	1500 x 850	450	625	1700 x 900 x 1350
VL-3	890 m.m.	1600 m.m.	1750 x 850	500	690	1950 x 900 x 1350
VL-4	1135 m.m.	1820 m.m.	2200 x 850	550	750	2400 x 900 x 1350

MAIN SPINDLE :

Spindle bore	: 40 m.m.
Spindle Nose diameter	: 60 m.m.
Spindle thread	: 8 T.P.I.
Spindle Morse Taper	: MT-5
Spindle Adapter Morse Taper	: MT-3
Spindle Speeds	: 8
Spindle Speeds Range	: 40 to 950 R.P.M.
Spindle Drive	: V - Belt,
Spindle Mounting	: Taper Roller Bearings

STANDARD ACCESSORIES :

Flame Hardened bed ways,
Chuck back plate 1 no, centre adapter, Dead centres (MT - 3) 2 nos, Tool Post Spanner, Motor pulley, Thread dial indicator, chip tray, Change gear set - 1 (For metric and inch both)

TAIL STOCK SPINDLE :

OPTIONAL ACCESSORIES :

Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, motorised coolant pump with tank and fittings, Rear tool post with extended cross slide, Norton gear box, Chuck back plates (Extra), and Electricals (Motor, Switch, wirings, V-belts and fittings)

Spindle diameter	: 38.1 m.m.
Spindle travel	: 120 m.m.
Spindle Morse Taper	: MT - 3

LEADING SCREW : Diameter / Threads : 25.4 m.m. / 4 TPI

FEEDS

Nos. of Feeds / Range (Without norton Gearbox )	Metric : Inch :	13 / 1 m.m. To 6 m.m. Pitch 19 / 2 To 24 T.P.I.
Nos. of Feeds / Range (For Fully norton Gearbox)	Metric : Inch :	17 / 0.5 m.m. To 15 m.m. Pitch 40 / 2 To 60 T.P.I.

ELECTRICALS :

Electric Motor of 1 H.P. / 0.75 k.w., 3 Phase, 50 Hz, 440 V., 1440 RPM with Reverse-Forward switch, V-Belt, Electrical Wirings and fittings.

NOTE :

As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.


	Home \| Company \| Quality \| Products \| Contacts