Product List
Geaered Head
Heavy Duty
Late Machine
Geaered Head
Medium Duty
Late Machine
Universal Radial
Drilling Machine
VR-38
Cone Pulley
Heavy Duty
Lathe Machine
Cone Pulley
Medium Duty
Lathe Machine
Cone Pulley
Light Duty
Lathe Machine
Cone Pulley
Heavy Duty
Lathe Machine
VLM Model
Cone Pulley
Extra Heavy Duty
Lathe Machine
Special Purpose
Machine
Special Purpose
Machine
   
:: Products - Cone Pulley Extra Heavy Duty Lathe Machine
Cone Pulley Extra Heavy Duty Lathe Machine
TECHNICAL DATA AND SPECIFICATIONS FOR STANDARD MODEL
WITH WIDTH OF BED 375 m.m. (15“)
 
  CENTRE HEIGHT 12" CENTRE HEIGHT 14" CENTRE HEIGHT 15"
Centre Height over flat bed ways 304 m.m. 355 m.m. 380 m.m.
Swing over Bed 580 m.m. 680 m.m. 730 m.m.
Swing over Cross slide 400 m.m. 500 m.m. 550 m.m.
Swing in Gap 900 m.m. 1000 m.m. 1050 m.m.
 
MAIN SPINDLE :
Spindle bore (1) 51 mm. with Taper Roller bearing or bush bearing
  (2) 79 mm. with Taper Roller bearing or bush bearing
  (3) 104 mm. with Taper Roller bearing or bush bearing
  (4) 129 mm. with bush bearing
  (5) 151 mm. with bush bearing
Spindle Drive (1) FLAT BELT OR V - BELT
 
MODEL LENGTH
OF BED		 ADMIT
BETWEEN
CENTRES
VH-0 1675 m.m. (5’-6”) 525 m.m.
VH-1 2135 m.m. (7’) 1000 m.m.
VH-2 2745 m.m. (9’) 1600 m.m.
VH-3 3050 m.m. (10’) 1900 m.m.
VH-4 3660 m.m. (12’) 2500 m.m.
VH-5 4270 m.m. (14’) 3100 m.m.
VH-6 4875 m.m. (16’) 3710 m.m.
VH-7 5485 m.m. (18’) 4320 m.m.
VH-8 6095 m.m. (20’) 4930 m.m.
 
TECHNICAL DATA AND SPECIFICATIONS FOR STANDARD MODEL
WITH WIDTH OF BED 452 m.m. (18“)
 
  CENTRE HEIGHT 14" CENTRE HEIGHT 16" CENTRE HEIGHT 18"
Centre Height over flat bed ways 355 m.m. 405 m.m. 456 m.m.
Swing over Bed 690 m.m. 790 m.m. 890 m.m.
Swing over Cross slide 425 m.m. 525 m.m. 625 m.m.
Swing in Gap 1090 m.m. 1195 m.m. 1295 m.m.
 
MAIN SPINDLE :
Spindle bore (1) 51 mm. with Taper Roller bearing or bush bearing
  (2) 97 mm. with Taper Roller bearing or bush bearing
  (3) 104 mm. with Taper Roller bearing or bush bearing
  (4) 129 mm. with bush bearing
  (5) 151 mm. with bush bearing
Spindle Drive (1) FLAT BELT OR V - BELT
 
MODEL LENGTH
OF BED		 ADMIT
BETWEEN
CENTRES
VH-1 2135 m.m. (7’) 700 m.m.
VH-2 2745 m.m. (9’) 1300 m.m.
VH-3 3050 m.m. (10’) 1600 m.m.
VH-4 3660 m.m. (12’) 2200 m.m.
VH-5 4270 m.m. (14’) 2800 m.m.
VH-6 4875 m.m. (16’) 3400 m.m.
VH-7 5485 m.m. (18’) 4020 m.m.
VH-8 6095 m.m. (20’) 4630 m.m.
 
STANDARD ACCESSORIES :

Flame Hardened bed ways, Chuck back plate 1 no, centre adapter, Dead centres (MT - 4) 2 nos, Tool Post Spanner, Motor pulley, Thread dial indicator, chip tray, Nylone flat belt, Change gear set - 1 (For metric and inch both)
OPTIONAL ACCESSORIES :

Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, motorised coolant pump with tank and fittings, Rear tool post with extended cross slide, Norton gear box, Chuck back plates (Extra), V-Belt drive pullies in lieu of flat belt, main spindle mounted on taper roller bearings in lieu of bush bearings and Electricals (Motor, Switch, wirings, V-belts and fittings)
 
IMPORTANT :
Any Change in Specifications of the machine like center height, width of bed, hollow of spindle etc. Will be provided as per requirements at extra cost.
 
NOTE :
As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.
 
 
  Home | Company | Quality | Products | Contacts  
Copyright © 2007 Vinit Engineering Works. All rights reserved.